Atmizoo SteamShell Basic Edition SS

Atmizoo SteamShell Basic Edition SS

SteamShell is the successor to Atmizoo's legendary rba the VapeShell.

Atmizoo was able to complete the task thanks to some rethinking and enhancements made to VapeShell's design, as well as inspiration from the innovative VapeSnail. Utilizing the SnailTank and it's advantages, SteamShell gets limitless possibilities.

The new and revised deck now has cut-outs on the outer rim for simple rebuilding and superior wicking holes eliminate all potential wicking problems. A sleeve-like cooperation connects it to the top chimney body, providing excellent real-time access to the deck as needed. Under the coil, the airflow is controlled by fixed air flow tubes. These tubes may always be changed at any time in real time, maintaining the integrity of the build and the liquid inside the tank. To meet the needs of any vaping style, there are a total of eleven distinct air flow options and two different chimney tubes.

rDL, DL, or MTL
With tubes and pins as mentioned above, the whole variety of draw types and vaping styles is covered. But that is not where Atmizoo stopped. A vaporization chamber and chimney are necessary for properly adjusting an MTL, rDL, or DL profile. Because of this, the SteamShell will ship with two chimney options: a restricted chimney that is specifically made to accommodate MTL and tight rDL vaping and an open chimney that is made to accommodate loose rDL and DL. In contrast to the usage of chimney reducers, this design option simplifies things and is more user-friendly.

Last but not least, a robust 510 compatible base for rebuilding is also included. The maximum air flow choice would have been reduced to about 3/3.5mm if the aux base had been skipped in favor of a 510 threading around the bottom of the RBA, therefore Atmizoo chose the practical alternative instead.

Specifications:

• Air flow tuning via five pin options 0.8mm/1.0mm/1.2mm/ 1.5mm/1.8mm respectively, pinned inside a D=4.0mm nest, plus through five air flow tubes 2.0mm/2.5mm/3.0mm/3.5mm/4.0mm. Air flow pole 5.0mm pinned inside the deck Nut from below for a perfect airy 5.0mm DL.
• M2.5mm pan head phillips post screws.
• 11.5mm post-to-post length, 8.4mm post-to-post net space , 8.0mm coil space.
• Tank capacity 5.3ml inside the SnailTank.
• Max. net coiling height 6.8mm
• Chimney top inner D ~5.0mm (Open Chimney) / ~3.5mm (Restricted Chimney).

The package includes:

Basic Edition

• 1 x SteamShell RBA (pre-installed: Air Flow Tube 4.0mm)
• 1 x Set of Spares (2 x Post Screws, 1 x O-rings Kit SIL BLACK, 1 x Chimney Tube Open, 1 x Chimney Tube Restricted, 1 x Aux 510 Rebuilding Base)
• 1 x User Manual
• 1 x Warranty Card